High Performance One Component Polyurethane Adhesive To Brazil - China

I

Q: Please introduce the polyurethane adhesive.

A:

polyurethane adhesive is elastic sealing materials which are one component, moisture curing polyurethane foam filling, multi-purpose .

Filling Polyurethane pre polymer and catalyzer and gas propellant in iron aerosol cans withstanding pressure.

When constructing, Spray aerosol gel to the site of the construction by using matching sizing gun or manual nozzle.

And complete molding, foaming, bonding and sealing processes in the short term.

Cured foam elastomer of Polyurethane (PU) foam sealant has a lot of excellent performance, such as bond, waterproof, withstanding thermal expansion and contraction, heat insulation, sound insulation and even flame retardant, etc.

II

Q: What matters should be attention to about polyurethane adhesive?

A: The following matters should be attention to:

1 - No burning or piercing material tank and empty tank after using.

2 - Do not invert during transporting and storage processes.

3 - The construction site should have good ventilation conditions.

Construction personnel should wear work gloves and goggles work clothes.

At the same time do not smoke.

4 - The non - solidified foam is sticky to the clothes and the skin.

Pay attention to protection when using.

If the bubble is touching the eyes, rinse immediately with water and consult a doctor.



III

Q: What are the key points of construction operation about polyurethane adhesive?

A:

1 - process flow

Clean - details of basic level surface to make glue, besmear to brush glue (cold) base oil - details attached middle construction - the first time and the second time coating and coating to third time coating waterproof layer construction, waterproof layer a test to cover ACTS the role of surface, waterproof layer second acceptance test and waterproof layer.

2 - Before construction of waterproof layer, should swept away the primary surface dust and other debris, and use wet cloth clean to brush one more time.

3 - Besmear brushs the waterproof layer of the basic surface, can not have uneven, loose, empty drum, play sand, cracking and other defects, the moisture content is generally not more than 9%.

4 - Besmear bottom glue (cold priming oil) :

1) Dispensing glue, first to add a and b material polyurethane xylene, ratio is 1: 1 - 5: 2 (weight ratio) and mixed amount shall be determined according to specific situation, unfavorable and overmuch.

2) Brush glue, according to the law on preparation, good glue mixture evenly with the roller surface at the grassroots level, besmear brushs the amount of 0.15-0.2 kg/m2, besmear after normal temperature season 4 h later, feel is not sticky, can do the next working procedure.

5 - Coating waterproof layer construction: Polyurethane waterproof material for Polyurethane material a, Polyurethane material b and xylene, ratio of 1: 1, 5: 0 - 2 (weight ratio).

IV

Q: What's the performance index of polyurethane adhesive?

A:

Index Technical index Experimental method

tensile strength ≥6.0 GB/T19250

Tensile strength retention rate Heating treatment ≥100

Alkali treatment ≥70

acid treatment ≥80

elongation at break Without treatment ≥450

Heating treatment ≥450

Alkali treatment ≥450

acid treatment ≥450

Bending rate at low temperature Without treatment ≤-35, No cracks

Heating treatment

Alkali treatment

acid treatment

V

Q: What is the storage mode about polyurethane adhesive?

A: The period of validity is 12 months.

It should be placed in a cool and dry place.

Avoid direct sunlight and the temperature should not exceed 50 degrees.



VI

Q: What's about the application of polyurethane adhesive?

A:

Door and window installation: Caulking, seal, fixed bonding between doors and windows and wall.

Waterproof plugging: Repair of plugging of Tap water pipes, sewers and other loopholes.

Thermal insulation filling: Insulation joint of cold storage and air conditioning.

Daily maintenance: Repair the empty of slot, wall tiles, tiles and floor.

Sound insulation and noise elimination: Gap filling of the meeting room or Sound lab during renovating.

Packaging and transportation: It is convenient to packaging fragile valuables.



Contact information

Sales Manager: lurywen

Mobile Phone: +86-13323183257

Tel: 86-318-5106277

Fax: 86-0318-5106277

Company: Hengshui Jianfeng Engineering Rubber Co., LTD.

Company Contact:

• Posted By: Hengshui Jianfeng Engineering Rubber Co.,LTD

• Phone: 8613323183257

• Address: Renmin road No.1657,Heng shui City,Hebei Province,China, hengshui , hebei , China

• Email:

• Business Description: Hengshui Jianfeng Engineering Rubber Co., LTD., a manufacturing company built
  
  in the year 1999, Located in the North of China, which is a professional manufacturer of water stop, waterproof materials and China association of rubber products waterproofing material association member units as well.
  
  Its annual production capacity is about 10000 tons.
  
  
  
  Our main products include: Waterproofing products as rubber waterstops, pvc water stops, Bentonite Waterstop; Bridge and road construction products as various
  
  Elastomeric bearings, bridge pot bearings, spherical bearings, bridge flexible equipment;
  
  Seismic isolation as lead rubber bearings, high damping rubber bearings, steel type seismic bearings and bridge expansion jont, Inflatable pipe plugs, etc.
  
  The company's operating philosophy is " Work once, Trust all lives ", relying on excellent technology, high quality products and excellent service to get the user's consistent high praise.
  
  Products are mainly used in water conservancy, electric power, environmental protection, ore smelting, machinery, municipal, transportation, airports, ports, stadiums, gardening and irrigation infrastructure industry.
  
  .
  
  in order to ensure product quality, not only has advanced testing equipment, and has passed ISO9001 international quality management system certification.
  
  The company established a perfect quality guarantee system, to ensure the engineering quality.
  
  We can also meet different standrad.