Qp280 Fly Ash Fired Clay Brick Cutting Machinesteel Material Auto Method - China

QP280 Senes Double Wire Frame Clay Red Brick Cutting Machine Product Description QT-26QP280 senes full-automatic strip cutting and blank cutting machine is mainly used to cut wud which is squeezed from extruder into qualified clay brick in the process of sintered brick production .

The new vertical stp cutting and blank cutting system designed and developed independently by which adopts advanced automati plc control, combing with photoelectic, close positioning, pneumatic and electnc servo systems and etc.

Double wire frame blank cutting machine can realize the interchangeable production to maximize the brick machine capacity .

It has advantages of high easy operation, simple maintenance and so on.

The excellent performance 1 - program-controlled pneumatic type vertical cutting machine; 2 - lh-zd (hard) mud type vertical strip cutting machine; 3 - The mud strip cutting machine.

- - - - Structural characteristics | 1 - Automatic let partial device never oblique cutting, do not need to be adjusted, the stainless steel drum power mesa clay-strip automatic in place, avoid wasting soil than ordinary flat mesa clean oil saving 70/100%.

Stainless steel push board face aperture wear-resisting, 3 times lifespan.

| 2 - Fully automatic operation, do not need to collect and artificial and plate, labor saving, high production efficiency.

Online continuous proportion ingredients system (automatic combustion precision machine) ingredients: fully automatic operation, the proportioning precision; Ingredients evenly, saving fuel, reducing pollution emissions, environmental protection and energy saving.

| 3 - Applicable to a variety of material ratio of continuous feeding conveyor, bucket batching system is simple and fast.

Intelligent control, avoid the error of the orientation and plugging material lead to arc make the wire into the slot accurately, reduce the wire broken by an average of 70%.

| 4 - High grinding material process guide for hard chromium plating, with composite guide bearing, small resistance, long service life.

Buffer accumulator absorb shock return and push return impact energy into power.

High strength, large thrust massively applied in coal gangue shale plasticity, half-hard plastic extrusion.

| 5 - Suitable for all kinds of material of hard and soft plastic clay mud of high sediment concentration inferior soil oil-saving effect is prominent.

Article through mud should be declared in advance, using encryption roller table.

Push board biggest reciprocating frequency 41 times/min.

Can be double mud, high block cutting | - - - - Details Represent Cutter belongs to building materials machinery, mainly for the brick factory production standard brick, the use of hollow bricks.

Cutting machine is used for hard surface of stainless steel, resistant to mud sliding friction, ironwork steel mesa long life several times in this lifetime.

Lighten the loam, fuel efficiency by 30%.

Easy to change after wear, avoid the scrap.

In addition to the mesa, characteristics of other parts of the same as the standard (type A).

(characterize high x x thick blocks/clearance) - (push billet power/deceleration machine) The machine details are required for production - - - - No | Equipment name | Quantity(set) | 1 | Fork-lift truck | 1 | 2 | Jaw crusher | 1 | 3 | Hammer crusher | 1 | 4 | Roller screen | 1 | 5 | Multi-bucket excavator | 1 | 6 | Box feeder | 2 | 7 | Roller fine crusher | 1 | 8 | Double shaft mixer | 1 | 9 | Double stage vacuum extruder | 1 | 10 | Cutting adobe machine | 1 | 11 | Auto brick setting machine | 1 | 12 | Kiln car | 50 | 13 | Hoffman Kiln | 1 | 14 | Storage transition stable | 1 | 15 | Intelligent progroum separator | 1 | 16 | Fuel tank | 1 | 17 | Rail tractor | 2 | 18 | Hydraulic ferry pusher | 2 | 19 | Vacuum Pump | 1 | 20 | Air compressor | 1 | 21 | Motor | 1 | 22 | Belt conveyor | 8 | 23 | V belt | 1 | 24 | Mould | 1 | 25 | Electric cabinet | 1 | 26 | Secondary Control cabinet | 2 | 27 | 2 years spare parts | 1 | 28 | Brick factory Tools | 1 | 29 | Warranty Card | 1 | - - - - The production process Product Show

Company Contact:

• Posted By: WANGDA Machinery Factory

• Phone: 86-371-64388011

• Address: No.34,XiaoYi Road,GongYi City,HeNan,China, Gongyi , Henan , China

• Email:

• Website: https://www.automaticbrickmakingmachine.com

• Business Description: Founded in1972 , Wangda Machinery factory was formerly known as telecom tool works which belongs to Post and Telegraph Department of the Fourth Engineering company .
  
  It locates in Gongyi City and only 600 meters away from railway station.